Gas Steam Boiler Manufacturer for Industrial & Process Heating Applications
We manufacture industrial gas-fired steam boilers for process heating, manufacturing plants, commercial facilities, and EPC projects. Each boiler system is engineered according to steam demand, fuel conditions, operating pressure, emission requirements, and local installation standards.
-
![Natural Gas Steam Boiler]()
Natural Gas Steam BoilerThe Natural Gas Steam Boiler is a shell-type, fully wet-back, three-pass fire-tube boiler designed for stable industrial steam generation. It uses natural gas as fuel, suitable for process... -
![LPG Gas Steam Boiler]()
LPG Gas Steam BoilerThe LPG Gas Steam Boiler is a WNS horizontal three-pass fire-tube boiler designed for stable saturated steam generation in industrial applications. It uses LPG-fired combustion, compact three-pass... -
![Water Tube Gas Steam Boiler]()
Water Tube Gas Steam BoilerThe Water Tube Gas Steam Boiler is a D-type packaged boiler with a membrane water-wall structure, designed for stable steam generation in industrial processes. -
![Low Nitrogen Gas Steam Boiler]()
Low Nitrogen Gas Steam BoilerLow Nitrogen Gas Steam Boiler is a fully automatic WNS horizontal fire-tube boiler designed for clean steam generation with low NOx emissions. Featuring a corrugated furnace, condensing heat... -
![Horizontal Gas Steam Boiler]()
Horizontal Gas Steam BoilerHorizontal Gas Steam Boiler is a fully automatic industrial steam boiler designed for stable and efficient steam generation. It supports natural gas, LPG, and light fuel oil, featuring a...
Technical Specifications
|
Parameter |
Specification |
|
Boiler Type |
Gas-Fired Steam Boiler |
|
Fuel Type |
Natural Gas, LNG, LPG, Biogas, Dual-Fuel (Optional) |
|
Steam Capacity |
Customized according to project requirements |
|
Working Pressure |
Designed according to application requirements |
|
Steam Temperature |
Configurable based on process requirements |
|
Thermal Efficiency |
Optimized according to boiler design and burner configuration |
|
Burner System |
Fully modulating gas burner with automatic fuel-air ratio control |
|
Burner Brands |
Riello, Weishaupt, Baltur, Oilon, Elco, or equivalent industrial burner brands |
|
Turndown Ratio |
Up to 10:1 depending on burner configuration |
|
Combustion Control |
Digital combustion management system with automatic load adjustment |
|
Emission Control |
Low NOx combustion options including premix and FGR technologies |
|
Boiler Body Material |
Pressure vessel steel selected according to design requirements |
|
Control System |
PLC-based control system with safety interlocks and monitoring functions |
|
Electrical Supply |
Configurable according to regional standards (IEC / UL / NEMA requirements) |
|
Design Standard |
Manufactured according to applicable pressure vessel and industrial safety standards |
|
Safety Protection |
Flame monitoring, pressure protection, temperature monitoring, and automatic shutdown functions |
|
Water Quality Requirements |
Designed according to feedwater conditions and recommended treatment systems |
|
Testing & Inspection |
Material traceability, welding inspection, NDT, and hydrostatic pressure testing |
|
Documentation |
GA drawings, P&ID, datasheets, inspection reports, certificates, and O&M manuals |
Engineering-Based Boiler Selection
Steam Load Analysis
We evaluate steam demand, peak loads, operating cycles, and future expansion to ensure proper boiler sizing and stable operation.
Fuel Supply Conditions
Gas pressure, composition, and availability are considered for proper burner and gas train configuration.
Local Emission Requirements
Burner selection is optimized to meet regional NOx limits and emission standards.
Installation Conditions
Site conditions, electrical standards, chimney requirements, and available space are reviewed during engineering design.
Pre-Production Engineering Assessment
Site Conditions Review
Altitude and ambient conditions are evaluated to optimize combustion performance and air-fuel balance.
Feedwater Quality Evaluation
Water quality parameters are reviewed to recommend suitable treatment solutions and protect boiler performance.
Flue Gas System Assessment
Chimney design, exhaust routing, and backpressure are checked to ensure stable draft operation.
Electrical Requirements
Control systems and electrical components are configured to meet applicable IEC, UL, or NEMA standards.
International Burner Options
We configure industrial burners from established brands such as Riello, Weishaupt, Baltur, Oilon, and Elco according to project requirements.
Fully Modulating Combustion Control
Digital fuel-to-air ratio controls with high turndown ratios (up to 10:1) allow the burner to precisely match fluctuating steam loads without cycling off.
Emission Control for Gas-Fired Operation
Low NOx Technology
Premix and FGR burner options are available for projects requiring strict emission compliance.
Low CO Emissions
Micro-modulating servo controls maintain optimal excess oxygen levels, guaranteeing complete gas combustion and minimal Carbon Monoxide output
Quiet Acoustic Enclosures
Sound-attenuated burner shrouds keep mechanical room noise levels well below 80 dBA.
Gas Steam Boiler Applications
Our gas steam boilers power critical infrastructure and industrial operations worldwide:
Food & Beverage Industry
Steam supply for cooking, sterilization, pasteurization, bottling, and CIP cleaning systems.
01
Textile Manufacturing
Steam applications including dyeing, fabric finishing, ironing, and heat treatment processes.
02
Pharmaceutical & Healthcare
Steam systems for sterilization equipment, cleanroom humidification, and process heating.
03
Chemical & Petrochemical Industry
Process heating, reactor heating, distillation systems, and pipeline heat tracing.
04
Paper & Packaging Industry
High-temperature steam requirements for corrugating, drying, and adhesive curing processes.
05
Material Traceability
Pressure vessel materials are supplied with mill certificates and tracked through production records.
Welding Inspection
Critical pressure welds are inspected through non-destructive testing methods, including ultrasonic testing (UT) and radiographic testing (RT) according to project requirements.
Hydrostatic Pressure Testing
Boiler pressure parts undergo hydraulic testing to verify structural integrity before delivery.
Third-Party Inspection Support
Third-party inspection by authorized agencies can be arranged according to project requirements.
Final Inspection
Before shipment, we verify:
Boiler dimensions and appearance
Pressure components
Safety devices
Control system functions
Documentation completeness
Manufacturing Capability
Xinxiang Chengde Energy Technology Equipment Co. operates an industrial equipment manufacturing park with three production bases, covering 160 acres and 69,000㎡ of standardized workshop space.
Our manufacturing facilities are equipped with advanced fabrication, welding, machining, and assembly equipment for industrial boiler systems and pressure equipment, supporting consistent production quality from material preparation to final inspection.
Documentation & Project Support
For industrial and EPC projects, we provide complete technical documentation required for installation, commissioning, and local approval.
Documentation can include:
- General arrangement drawings
- P&ID diagrams
- Technical datasheets
- Material certificates
- Welding inspection reports
- Hydrostatic test records
- Operation and maintenance manuals
- Compliance certificates according to project requirements
FAQ
With abundant experience, we are one of the most reliable gas steam boiler manufacturers and suppliers in China. We warmly welcome you to buy durable gas steam boiler made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
